RSB-1
Machine Specifications
Reheat Stretch-Blow Molding Machine |
| •
Due to continual design improvements, specifications are
subject to change without notification. |
|
|
Last
Updated:
02-23-98 |
| ITEM: |
DESCRIPTION: |
VALUE: |
|
| Machine
Dimensions: |
Length, including
Descrambler |
119
in./ 3022 mm |
| Width, including
Descrambler |
96
in. / 2438 mm |
| Height |
103 in. / 2616
mm |
|
| Feed and Discharge |
Lanes |
1 |
| Preform Descrambler |
Included |
Yes |
|
| Heat Ovens |
Number |
2 |
| Equilibration
Zones |
Number |
2 |
| Lamps per Oven |
Number |
9 |
| Mandrels |
Number |
26 |
|
| Blow Clamps |
Number |
1 |
| Blow Molds |
Number |
1 |
| Blow
Mold Dimensions |
Height x Width |
13.37 in. x 6.0
in. / 340 mm x 152 mm |
| Mold Thickness
(Mold Closed) |
6.75 in. / 171.45
mm |
|
| Clamp
Capacity |
Platen to Platen
Daylight, Max. |
12 in. / 305 mm |
| Clamp Cylinder
Stroke |
3.12 in. / 79
mm |
| Mold Open Distance,
Max. |
5.25 in. / 133
mm |
| Clamp
Force |
13.5 tons / 12.25 |
| metric tons |
| Bottom Insert
Stroke |
3 in. / 76 mm |
| Bottle |
Volume, Nominal |
2 liter |
| Diameter, Max. |
4.5 in. / 115 |
| Height, Max. |
13.87 in. / 352
mm |
| Height, Max. -
Heated Blow Mold |
12.74in. / 324
mm |
|
| Preform |
Neck Finish Size |
18 mm - 43 mm |
| Neck
Finish Length |
0.38 - 1.12 in
/ |
| 10 - 28 mm |
| Overall Length,
Max. |
6.62 in. / 168
mm |
| Length Below Ring,
Max. |
5.5 in. / 140
mm |
| Stretch Rod Diameter,
Standard |
0.5 in. / 12.7
mm |
|
| Utilities: |
|
|
| Electrical |
Power Supply (volt
/ ph / Hz) |
460 / 3 / 50 -
60 |
| Drive Power |
kw |
8.4 |
| Heating Power |
kw |
0 - 45 |
Chilled Water
(Blow Mold) |
Water Temperature |
40
- 85 deg F / 4 - 29 deg C |
| Tower Water (Ovens) |
Water Temperature,
Max. |
85 deg F / 29
deg C |
| Compressed Air |
Pressure, Max. |
125 psi / 8.6
bar |
| Blow Air |
Pressure, Max. |
600 psi / 41.3
bar |
|
| Options |
Neck
Finish (Note 1) |
18
mm - 72 mm |
| Neck
Finish Length |
0.38 - 1.75 in.
/ |
| 10 - 44 mm |
| Stretch
Rod Diameter |
0.25 - 0.75 in
/ |
| 6 - 19 mm |
| Electrically Heated
Blow Mold |
yes |
| Internal
Bottle Cooling |
yes |
| Finish
Orientation |
yes |
| Pref.
Heat For Highly Ovalized Containers |
yes |
|
| Notes: |
(1) Overall Preform
Length must be greater than support ring diameter. |
|
|
